Garmap CE runs on H/PCs or P/PCs running Windows CE 2.0 (or maybe later).
Garmap CE is freeware.
Garmap CE communicates with Garmin GPS receiver to manage Track logs, Waypoints and Routes, and shows your
current position on a map. Garmap CE also offers a function like Garmin's GPS "GoTo"... it shows your current speed,
track, bearing and ETE.
Maps may be in either BMP or 2BP format. Before you can use a bitmap as a map, the bitmap has to be calibrated. See calibration.
Maps may be divided into segments to improve performance. Garmap CE load 9 bitmaps at a time. If required, Garmap CE will automatically change maps based on your current position.
Garmap CE uses Garmin Protocol to deal with Track Log / Waypoint / Route management / Navigation , and uses NMEA data for NMEA Navigation. If you choose NMEA Navigation, you can store of NMEA sentences on a H/PC or P/PC.
1.Download Track Logs, Waypoints and Routes from a Garmin GPS receiver.
2.Create and Upload Waypoints and Routes to a Garmin GPS receiver.
3.Show current position on a map.
4.124 MAP DATUMs are supported.
Download MFCDLL if you need.
Download Operation Manual
H/PC1.0 MIPS DLL A-51 SH3 DLL H/PC2.0
A-55V, A-60, Jornada680
SH3 DLL PsPC2.11 E-55, E-500, l'agenda(BE-300) MIPS DLL SH3 DLL PocketPC iPAQ,GENIO e550G ARM DLL E-700, GFORT, E-750 MIPS DLL Jornada548 SH3 DLL H/PC Pro, H/PC2000 Jornada710/720 ARM DLL MC-R510 MIPS DLL SH3 DLL SH4 DLL